Manufacturing Engineer - Manufacturing/Off Road/Equipment Manufacturing Engineer Job: A leading manufacturer of heavy equipment located in Peoria, IL is actively searching for a Senior Manufacturing Engineer to assist and train Manufacturing Engineering staff in planning the facility with quantitative tools such as load tables, determining equipment loads, line balance, and manpower requirements. This position will support manufacturing by purchasing adequate equipment, tools, and supplies within budget. Improving the quality of the product by introducing new technology and methods to reduce defect rates, reduce the costs in the operation by improving efficiency in the process, improving direct or indirect materials in the ...

Reliability Engineer - Reliability/Warranty/Off Road Equipment Reliability Engineer Job: A leading manufacturer of heavy equipment located in Peoria, IL is actively searching for a Senior Reliability Engineer. This position manages the monitoring and control of key performance measurements of complex, broad-based and distinctly different customer support agreements (e.g. extended warranties, prorated guarantees, cost-not-to-exceed guarantees, planned component replacement, maintenance and repair contracts, share-in-savings contracts, availability guarantees, performance guarantees, etc.) involving the technical and risk mitigation strategies for commitments equaling or exceeding annual sales in value. The focus of this position will be to work with the computer systems involved in tracking fleet ...

Reliability Engineer - Reliability/Warranty/Off Road Equipment Reliability Engineer Job: A leading manufacturer of heavy equipment located in Peoria, IL is actively searching for a Senior Reliability Engineer. This position manages the monitoring and control of key performance measurements of complex, broad-based and distinctly different customer support agreements (e.g. extended warranties, prorated guarantees, cost-not-to-exceed guarantees, planned component replacement, maintenance and repair contracts, share-in-savings contracts, availability guarantees, performance guarantees, etc.) involving the technical and risk mitigation strategies for commitments equaling or exceeding annual sales in value. The focus of this position will be to work with the computer systems involved in tracking fleet ...

Electrical Engineer - Power/Drivetrain/Systems Electrical Engineer Job: Career opportunity with this global OEM provider. Multiple positions available. Must be willing to relocate to central IL. Travel is less than 25%. TWO levels available: 2 - 7 years experience is $60K to $90K. 7+ years experience is $90 to $125K. Excellent benefits and relocation assistance available. Potential bonus opportunities. Must have BSEE. Work with a team engaged in R&D related to advanced drivetrains for product lines. Responsibilities include electrical designs and electrical system integration for AC drive systems as well as motor and generator development and validation. Experience with automotive, rail or ...

Engineering Sr. Energy Efficiency Engineer SAIC is a FORTUNE 500® scientific, engineering, and technology applications company that uses its deep domain knowledge to solve problems of vital importance to the nation and the world, in national security, energy and the environment, critical infrastructure, and health. We are seeking a candidate for "green" building projects, working within a creative team environment in the Peoria area. To apply, please visit www.saic.com/career and reference Required ID 132198. Join us and make SAIC your company, too. EOE. ©2008 SAIC. All rights reserved. Science Applications International Corporation ...

STS Staffing is currently seeking experienced professionals for the following Direct Hire openings located in Goodfield. * Project Manager * Facilities Engineer * 2nd shift Fabrication Supervisor * 3rd shift Weld Engineer * 3rd shift Welding Production Planner * 3rd shift Fabrication Production Planner * 3rd shift Fabrication Manufacturing Engineer Intern Positions: * Design Engineer Intern * Manufacturing Engineer Intern * Product Test and Evaluation Intern To inquire about this positions, please contact Lorie at STS Staffing at (309) 965-2233 Ext.2511 Resumes accepted by e-mail to lorie@stsstaffing.com or Fax (309) 965-2042 Email brit0111@yahoo.com ...

Controls Engineer. Position requires M.S. in Electrical Engineering with ONE year experience. Job responsibilities include: Control system requirements definition; Design control system models; Develop algorithm and test plans; Perform verification and validation of electronic control systems; Product Documentation; Perform heavy equipment operation research analysis using 'C' ,C++, MATLAB, Simulink, Real Time Workshop, Stateflow, Matlab GUI, xPC Target. Job Location: PEORIA, IL Resumes: Belcan 423 SW Washington Peoria, IL 61602 Attn LT-RS Email confidential ...

Electrical Design Engineer - Electronic/Vehicle/Systems Electrical Design Engineer Job: A leading manufacturer with a location in Peoria, IL is actively searching for a Senior Electrical Design Engineer. This position is responsible for planning, organizing, and supervising Design Engineering assignments including major projects for vehicle chassis, and/or components, and/or systems. Design responsibilities include analog and digital electronic circuits including 32 bit microprocessors, circuit board layout, vehicle control and fault logic and vehicle systems monitoring. Other responsibilities include monitoring contract electronic manufacture processes, drafting internal manufacturing checkout procedures, preparing engineering documentation for release, board support level software, design verification testing including environmental testing.This ...

ELECTRICAL ENGINEER Washington Mills, a leading supplier of silicon carbide for the abrasive and refractory industry, has an opening for an experienced Electrical Engineer in our Hennepin, IL facility. This position is responsible for all electrical systems in a large furnacing plant. Key responsibilities include systems troubleshooting, software programming, electrical/electronic capital projects, high voltage pm, control circuits design/troubleshooting, and material code requirements. The successful applicant will have a degree in electrical engineering with a minimum of 5-years experience in an industrial setting. Please send your resume to 13230 ESK Street, Hennepin, IL 61326. Email haywood_r@exolon.com ...

Company History Founded in 1886 as the American Water Works & Guarantee Company, American Water has been serving customers and communities for more than 121 years, and is the parent company to our nineteen state subsidiaries. The people of American Water have centuries of combined experience in the water and wastewater industry. The team includes world-renowned researchers who are on the leading edge of scientific study and environmental protection, people who have been with us not only decades, but also for generations, and those who are passionate about environmental stewardship and care. Our crew members and plant operators get up each ...

The U.S. Department of Agriculture (USDA), Agricultural Research Service (ARS), National Center for Agricultural Utilization Research in Peoria, IL, is seeking a permanent, full-time Facility Engineer (General Engineer, GS-11/12). Salary range of $54,568 to $84,913 per year. For details and application directions, see www.ars.usda.GOV/careers/ announcement number ARS-X9W-0009 or call 309-681- 6478. U.S. citizenship is required. Applications must be received by November 17, 2008. USDA/ARS is an equal opportunity employer and provider ...

Engineer Due to recent growth in our Manufacturing Services division, GandD Integrated is currently looking for a full time 1st shift Manufacturing Engineer. Job duties include: Item master maintenance, BOM set up, work center routings, CAD to CAM, processing of engineering change requests, time and motion studies to identify production standards, and new product introduction. Also, assembly procedures, setup reduction, facilitate kaizen events and facilitate pre-production runs. Background and skills required include: 5 years experience as a manufacturing Engineer. Experience with lean manufacturing, time and motion studies, 5S, ERP systems, BOM's, routings, item master maintenance. Experience with Master CAM, AutoCADD, and ...